| |
186Title |
Author |
Journal |
Year |
1. |
Comparison of search schemes in the design of Memo Retrieval System |
Proceeding International Conference Robotic as a tool for automation.(ICORAS) |
Aini Zuriyati, Syahrul Fahmi, Nazri Ibrahim |
2011 |
2. |
Comparison of Search Schemes in the design of an Information Retrieval System for Malay Language Fatwa |
Proceeding International Conference Robotic as a tool for automation.(ICORAS) |
Aini Zuriyati, Syahrul Fahmi, Nazri Ibrahim |
2011 |
3. |
A Review on Windows Gadget as a Tool for Office Automation |
Proceeding International Conference Robotic as a tool for automation.(ICORAS) |
Syahrul Fahmi, Akhyari Nasir, Aini Zuriyati |
2011 |
4. |
A Survey on ICT usage and percertion at TATIUC |
Proceeding International Conference Robotic as a tool for automation.(ICORAS) |
Azliza, Aini Zuriyati, Zurairah |
2011 |
5. |
Sdent Awareness Towards E-Learning in education |
Proceeding International Conference Education Learning (ICEL) |
Azliza, Aini Zuriyati, Zurairah |
2011 |
6. |
Student Awareness Towards E-Learning in edcation |
Procedia - Social and Behavioral Sciences |
Azliza Yacob, Aini Zuriyati Abdul Kadir, Zainuddin Othman, Zurairah Ahmad |
2011 |
7. |
ICT usage at TATiUC |
1st International Conference on Robotic Information System |
Azliza Yacob, Aini Zuriyati Abd Kadir, Zainuddin Othman, Zurairah Ahmad |
2011 |
8. |
Investigate of the optimizing three-method parting operation operation in turning process when parting stainless steel (Aisi316) |
Manufacturing Journal Engineering Technology (FMET) Vo1.1 2012 |
Zainal Ariffin, K.Khir |
2012 |
9. |
Corrosion behavior of mild steel in seawater from two different Sites of Kuala Terengganu coastal area |
International Journal of Basic & Applied Sciences |
W.B. Wan Nik, F. Zulkifli, M.M. Rahman, R. Rosliza |
2012 |
10. |
Corrosion behavior of aluminium alloy in Palm Oil Methyl Ester (B100) |
Teknologi (Science and Engineering), 58 (SUPPL.2), pp. 73-76. (SC) |
W.B. Wan Nik, S. Syahrullail, R. Rosliza, M.M. Rahman, M.F.R. Zulkifli |
2012 |
11. |
Effects of adding multiwalled carbon nanotube into dielectric when EDMing titanium alloy |
Advanced Materials Research 463-464, pp. 1445-1449. (SC) |
Izman, S, Hodsiyeh, D.G.,Hamed, T., Rosliza, R. Rezazadeh |
2012 |
12. |
Controllable Synthesis of Graphene Flakes in N-Methyl-Pyrrolidone (NMP) using Ultrasonic Treatment |
Prosiding, The 2nd International Symposium for Sustainability by Engineering at MIU, Mie University Japan |
Nabihah Abdullah |
2012 |
13. |
Synthesis and Structure Control of Graphene by Sonication of Graphite NanoPlatelets (GNP) |
Prosiding, International Conference on Nanotechnology 2012 (ICONT 2012), |
Nabihah Abdullah |
2012 |
14. |
Utilization of paper sludge wastes for treatment of wastewaterfrom food processing industreies |
Pakistan Journal of Analytical & Environmental Chemistry, Vol. 13 No.2 |
Ahmed H.A Dabwan, Satoshi Kaneco, Kiyoyuki Egusa, Daizo Imaui, Hideyuki Katsumata, Tohru Suzuki and Kiyohisa Ohta |
2012 |
15. |
Autonomous navigation for a dynamical hexapod robot using fuzzy logic controller |
Procedia Engineering, 2012. 38: p. 330-341 |
I. Mohd Tarmizi, dirman Hanafi, G. Ruzlaini |
2012 |
16. |
A ripple torque minimization strategy for matrix converter using hybrid PSO |
Procedia Engineering, 2012. 38: p. 111-124 |
G. Ruzlaini,I. Mohd Tarmizi,Ahmed N. Abdalla, damhuji Rifaie, Zulkarnain Lubis |
2012 |
17. |
Optimization of hot-wire air mass flow sensor by using fuzzy logic controller |
IEEE |
M. Ahmad Joraimee, S. Shahrul Naim, H.M. Ahmad Jazlan, I. Mohd Tarmizi, A. Kharudin |
2012 |
18. |
The development of hybrid microcontroller-based automated system |
Procedia Engineering |
A. Kharudin |
2012 |
19. |
Advanced Control of Hybrid PLC System |
Procedia Engineering |
Kharudin Ali, Ruzlaini Ghoni, Ahmed N. Abdalla |
2012 |
20. |
Improving Squirrel Cage Induction Motor Efficiency: Technical Review |
International Journal of Physical Sciences, 2012. 7(8): p. 1129-1140 |
Ramdan Razali, Ahmed N. Abdalla, Ruzlaini Ghoni, C.Venkataseshaiah. |
2012 |
21. |
Student Awareness Towards E-Learning in edcation |
Proceeding International Conference Education Learning (ICEL) |
Azliza, Aini Zuriyati, Zurairah |
2012 |
22. |
Student Awareness Towards E-Learning in edcation |
Social and Behavioural Sciences (ELSEVIER) |
Azliza, Aini Zuriyati, Zurairah |
2012 |
23. |
Security Issue At Kampung WIFI |
TATIUC Research and Innovation Exabition (TARIE) |
Akhiary, Syahrul Fahmi, Aini Zuriyati, Norhayati |
2012 |
24. |
A review of Wireless Broadband Technology in Malysia |
TATIUC Research and Innovation Exabition (TARIE) |
Aini Zuriyati, Syahrul Fahmi, Muriati |
2012 |
25. |
A Framework for Learning Programming Using TQM |
International Journal of Information and Education Technology |
Azliza Yacob, Md Yazid Mohd Saman, Mohd Hafiz Yusoff |
2012 |
26. |
Research Directions for e-Book: A Malaysian Perspective |
International Journal of Information Technology & Computer Science |
Wan Roslina Wan Othman, Syahrul Fahmy, Azliza Yacob, Nurul Haslinda Ngah, Ziti Fariha Mohd Apandi |
2012 |
27. |
Assessing Level of Motivation in Learning Programming Among Engineering Students |
The International Conference on Informatics and Applications |
Azliza Yacob, Mohd Yazid Md Saman |
2012 |
28. |
Enhancing Programming Skills & Motivation For Novice Learners |
Seminar Bersama Kemajuan Penyelidikan Pasca Siswazah UMT dan UniMAP |
Azliza Yacob, Md Yazid Mohd Saman, Mohd Hafiz Yusoff |
2012 |
29. |
Constructivisim Learning Theory Programming Through an e-Learning (IEEE) |
International Conference on New Trends in Information Science, Service Science and Data Mining |
Azliza Yacob, Md Yazid Mohd Saman, Mohd Hafiz Yusoff |
2012 |
30. |
Network Defender |
TATIUC Research and Innovation Exabition (TARIE) |
Azliza Yacob, Najmuddin, Ashraf |
2012 |
31. |
Assessing The Software Quality In e-Book Using the ISO 9126 Model |
TATIUC Research and Innovation Exabition (TARIE) |
Nurul Haslinda, Azliza Yacob, Wan Roslina Wan Othman, Syahrul Fahmy Abdul Wahab |
2012 |
32. |
ICT In Education: Research Direction For The e-Book |
TATIUC Research and Innovation Exabition (TARIE) |
Wan Roslina Wan Othman, Azliza Yacob, Nurul Haslinda, Syahrul Fahmy Abdul Wahab |
2012 |
33. |
Tranforming Kaizen Methodology to Programming Learning |
TATIUC Research and Innovation Exabition (TARIE) |
Azliza Yacob |
2012 |
34. |
Improving 'Students' Motivation and Programming Skills using TQM Approach: A Critical evaluation of Students' performance |
Extended Abstract |
Azliza Yacob, Md Yazid Mohd Saman, Mohd Hafiz Yusoff |
2012 |
35. |
Characterization of Graphene Flakes Produced with Ultrasonication in N-Methyl-Pyrrolidone (NMP) |
Prosiding, International Conference on Chemical Innovation (ICCI 2013), Bali Indonesia 12th -13th December 2013 |
Nabihah Abdullah |
2013 |
36. |
controlled robotic system by using facial bio-potential signal pattern. |
Advanced in Environmental biology, special Issue |
M. Ahmad Joraimee, I. Mohd Tarmizi, A. Kharudin |
2013 |
37. |
Simulation of plastic fill pattern validation in injection Molding |
2nd International conference on advanced Manufacturing (ICAM) 2013 |
M. Alias, Zainal Ariffin |
2013 |
38. |
Dimension accuracy of product design based on layout orientatoin |
2nd International conference on advanced Manufacturing (ICAM) 2013 |
R. Ummi Nazahah, Zainal Ariffin, C.Mohammad |
2013 |
39. |
The effect of various diameter oriffice nozzle coolant on surface roughness performance in CNC Turning |
Manufactuirng Journal engineering Technology (IMEC) University Malaysia Pahang |
Zainal Ariffin, Ahmad Razlan, M.M Rahman |
2013 |
40. |
The influence of the hardness on tool steel (DF-3 Assab Steel) in head treatment |
2nd International conference on advanced Manufacturing (ICAM) 2013 |
M. alias, Zainal Ariffin, M.A Sharifah Aimi, U.M. Zulkifli |
2013 |
41. |
An Intelligent Control of Sensorless Matrix Converter Induction Motor Drive Using PSO Model |
Technics Technologies Education Management Journal |
Ruzlaini Ghoni, Ahmed N. Abdalla |
2013 |
42. |
Investigate study the surface finish of the hole quality using reaming process |
2nd International conference on advanced Manufacturing (ICAM) 2013 |
C. Mohamad, Zainal Ariffin, Mukhtar, A.Ahmad Faiz |
2013 |
43. |
Long physico-chemical and biological monitoring for treated artificial tidal flats with recycled paper sludge in Ago-Bay, Japan |
Advanced Materials Research |
Dabwan, A.H.A., Imai, D., kaneco, S., Suzuki, T., Ohta, K. |
2013 |
44. |
Application of solidified sea bottom sediments into environmental bioremidiation materials |
Arabian journal of chemistry |
Dabwan, A.H.A., Imai, D., Kaneco, Funasaka, K., Katsumata, H. |
2013 |
45. |
Investigation on NiCrSiB coating via High velocity Oxygen fuel spraying |
Advance Science Letters |
Baba, N.B., Sapie, H.M.M. |
2013 |
46. |
Assessment of performance of sodium benzoate corrosion inhibitor performance on AA6063 in sea water |
Biosciences Biotechnology Research Asia |
Wan Nik, W.B., Rosliza, R. Sulaiman, O.O., Eng Giap, S.G. Kader, A.S.A. |
2013 |
47. |
Gravimetric analysis of corrosion inhibition on Al-Mg-Si alloy by environmental friendly products |
Advanced in Environmental biology |
Wan Nik, W.B., Rosliza,Izman, S. |
2013 |
48. |
Strategic human resource for lean management involving quality and operational performance |
2nd International conference on advanced Manufacturing (ICAM) 2013 |
M. Alias, A. Wan Ab Aziz, S.B. Mohamed, Z. Ibrahim, M.S. Muda and A.N.M. Rose |
2013 |
49. |
Preparation and 3D morphology observation of phenolic resin-silica nanocomposites |
International journal of Materials, Mechanics and Manufacturing, Vol.1,2 |
M.A. Norul Azlin, M.Z. siti Zuraifah |
2013 |
50. |
Despeckling of ultrasound images of bone fracture using multiple filtering algorithms |
Mathematical and computer modelling, Vol. 57, Issus 1-2 |
Muhammad Luqman, M.Z. |
2013 |
51. |
Protein Sequence Alignment using Dynamic Programming |
Preceeding of International Conference of Information Technology (ICIT) |
Aini Zuriyati, Zainuddin, Muriati |
2013 |
52. |
Comparison of open source software: Moodle and Efront. |
Preceeding of International Conference of Information Technology (ICIT) |
Muriati, Aini Zuriyati |
2013 |
53. |
Smart home web filtering Mini Appliance Content |
International Conference and Exposition on Invention of Institution of Higher Learning (PECIPTA) |
Saiful, Syahrul Fahmi, Akhyari, Shah Shafie, Aini Zuriyati |
2013 |
54. |
Recycle |
International Conference and Exposition on Invention of Institution of Higher Learning (PECIPTA) |
Amarah, Mohd. Khairul Hafizi, Norhayatie, Aini Zuriyati |
2013 |
55. |
Motivation Assessment Model For Contructivism Learning |
International Journal of Digital Content Technology and its Applications |
Azliza Yacob, Mohd Hafiz Yusoff, Md Yazid Mohd Saman |
2013 |
56. |
Implementation of Total Quality Management for Performance Measurement |
International UMT Annual Symposium |
Azliza Yacob, Noraida Hj Ali, Mohd Hafiz Yusoff, Md Yazid Mohd Saman |
2013 |
57. |
Development of water adsorbent synthesized from spent bleaching earth to dehydrate ethanol water mixture |
Advanced Material Research |
Azharin Shah Abd Aziz |
2014 |
58. |
Methodolgy to produce hard coherent water adsorbent using modified fusion method |
Australian Journal of Basic and Applied Science |
Azharin Shah Abd Aziz |
2014 |
59. |
Potential of KMnO4 and H2O2 in treating semi-aerobic landfill leachate |
Applied Water Science.4, 303-309 |
N. Abdullah, H.A. Aziz, N.N.A.N. Yusuf, M. Umar, S.S.A. Amr |
2014 |
60. |
Covalent Functionalization Of Graphene Flakes With Well-Defined Azido-Terminated Poly(?-caprolactone) And Poly(2-oxazoline) |
Prosiding,2. MRS-Id Meeting 2014, Bali Indonesia, 26th -28th September 2014 |
Nabihah Abdullah |
2014 |
61. |
Optimization of conditions for the photocatalytic degradation of EDTA in aqueous solution with Fe-doped titanium dioxide |
Open Journal of Inorganic Non-Metallic Materials 4: 21-27. |
Ahmed H.A. dabwan, Tomoki Sugiyama, Hideyuki Katsumata, Tohru Suzuki, satoshi Kaneco |
2014 |
62. |
Non-steroidal anti inflammatory drug (NSAID) determination in environmental samples by solid phase extraction coupled to High Performance Liquid Chromatography with fluorescence detection |
Australian Journal for Basic and Applied Science |
Ahmed H.A. dabwan, Mika Ohuhashi, Hideyuki Katsumata, Tohru Suzuki, satoshi Kaneco |
2014 |
63. |
Preliminary study of polylactic acid/graphene oxide nanocomposites prepared by melt |
Australian Journal of Basic and Applied Science (AJBAS) |
Norazlina Hashim, Kamal Yusoh |
2014 |
64. |
Modeling and simulation of a direct ethanol fuel cell : An Overview |
Journal of Power Sources |
S.Abdullah, S.K.Kamarudin, U.A.Hasran,M.S.Masdar, W.R.W.Daud |
2014 |
65. |
Comparison of modeling approaches in Direct Ethanol Fuel Cells |
Australian Journal of Basic and applied Science |
A.Suhaila, S.K.Kamarudin |
2014 |
66. |
Underwater Image Quality Enhancement through Composition of Dual-Intensity Images and Rayleigh-stretching |
SpringerPlus 2014, 3:757, doi:10.1186/2193-1801-3-757 |
A.S. Abdul Ghani and N.A. Mat Isa |
2014 |
67. |
Underwater Image Quality Enhancement through Integrated Color Model with Rayleigh distribution |
Elsevier: Applied Soft Computing Journal. November 2014. Vol. 27, pp. 219-230. |
A.S. Abdul Ghani and N.A. Mat Isa |
2014 |
68. |
Underwater image quality enhancement through Rayleigh-stretching and averaging image planes. |
International Journal of Naval Architecture and Ocean Engineering. 6(4). |
A.S. Abdul Ghani and N.A. Mat Isa |
2014 |
69. |
Analysis on Tool Life and Surface Characteristic in Milling Stavax Supreme Material |
Applied Mechanics and Materials |
Muhd Fathil bin Che Ibrahim |
2014 |
70. |
Study of Effect Coolant Strategy on Surface Roughness and Tool Performance During Machining of Stavax Supreme |
Basic and Applied Sciences |
Muhd Fathil bin Che Ibrahim |
2014 |
71. |
Design Improvement and Computer Assisted Fabrication On The Impact Wrench For Car Wheel Nuts Puller In Automotive Industry |
Basic and Applied Sciences |
Muhd Fathil bin Che Ibrahim |
2014 |
72. |
Machining of Injection Mould Materials for Different Cutting Flute in Low-Speed End Milling |
Applied Mechanics and Materials |
Muhd Fathil bin Che Ibrahim |
2014 |
73. |
Effect of various diameters oriffice nozzle coolant on surface roughness perfromance in CNC Turning |
Advanced Material Research Voi. 903 (2014) pp 169.174 (2014) Trans Tech Publication, Switzerland doi: 10.4028 www. Scientific.net/AMR 903.169 |
Zainal Ariffin, Ahmad Razlan, M.M Rahman |
2014 |
74. |
Investgation on effect of cutting fluid pressure toward machinability using stailess steelm 304 with coated cemented. |
Australian Journal of Basic and Applied sciences, B(4) special 2014, page: 695-699 |
Zainal Ariffin, M. Razali |
2014 |
75. |
The influence of the hardness on tool steel (DF-3 Assab steel) in heat treatment |
Australian Journal of Basic and Applied sciences, 8(4) Special 2014, Pages 423-427. |
M. Alias, S.M.A. Sharifah Aimi Sakinah, S. Zainal Ariffin and U.M Zulkifli |
2014 |
76. |
Resource for lean management involving quality and operational performance |
Australian Journal of Basic and Applied sciences, 8(4) Special 2014, Pages: 752-760 |
M. Alias, A. Wan Ab Aziz, S.B. Mohamed, Z. Ibrahim, M.S. Muda and A.N.M. Rose |
2014 |
77. |
Thermal properties of NiCrSiB coating on piston engine |
Advanced Material Research |
Baba, N.B, Omar, M.M.A., Zin N.A.M. |
2014 |
78. |
Compatible study of replacement material for cold cutting machine |
Advanced Material Research |
Aziz, M.R.A. , Baba, N.B., Zin, N.A.M |
2014 |
79. |
Anti-Corrosive performance of environmental friendly materials on Al-Mg-si alloy |
Advanced Material Research |
Rosliza, R., Niki, w.B.W., Izman, S. |
2014 |
80. |
Thermal parameter affects on the part built using 3D printer project SD 3000 |
Material Science Forum |
Ahmad M.S., Baharudin, B.T.H.T., Leman, Z., Ismail, N., Sulaiman, s. |
2014 |
81. |
Effect of different cooling methods on the corrosion behaviour at welded area of aluminium alloy |
World Journal of Engineering |
Wan Nik, W.B., Rosliza, R. Zulkifli, M.F., Hui, D. |
2014 |
82. |
Prediction of Particles-Air Movement in Silo during Filling Operation |
Open Journal of Inorganic Non-Metallic Materials 4: 21-27. |
S.I. Rani, J. Gimbun and B.A. Aziz |
2014 |
83. |
CFD Simulation of Dust Cloud Formation in Silo |
Australian Journal of Basic and Applied Science |
S.I. Rani, J. Gimbun and B.A. Aziz |
2014 |
84. |
The Analysis of coating Performance on stainless steel in high speed machining. |
Australian Journal of Basic and Applied Science, 8(4), pp ; 528-531 |
N.Ngah, B.T.H.T. Baharudin, N. Shari, R.M. Mamat, |
2014 |
85. |
Analysis and simulation model of indoor air. |
International Journal of Engineering Technology,4(11), pp. 628 - 634 |
M.H Ibrahim, Z. Muhammad, R. M. Mamat |
2014 |
86. |
Optimization of material usage using green manufacturing technique for automotive supplier part. |
Australian Journal of Basic and Applied Science, 8(4), pp ; 687-694 |
R.M. Mamat, N.Ngah |
2014 |
87. |
Linear quadratic gaussian (LDG) design for servo moror |
Australian Journal of Basic and Applied Science, Special 2014, 8(4), pp ; 700-713 |
W.M. Wan Syahidah |
2014 |
88. |
Instrumented motorcycle study for probability of accident in mixed mode traffic when vehicle approached for safety road used: Malaysia |
Indian Journal of Science and Technology |
A. Kharudin |
2014 |
89. |
Long distance wireless monitoring security house system |
Australian Journal of Basic and Applied Science, Special 2014, |
A. Kharudin |
2014 |
90. |
Innovative design and fabrication for assemble and removing the piston pin from connecting rod (Piston Pin Removal - PR) |
International Journal of Innovative Science, Engineering and Technology |
S.M. Shari, M.Mukhtar, S. Na'ain |
2014 |
91. |
Performance of TiaIn coated carbide tool in peck drilling stainless steel SS316L with pressurized minimum quantity lubrication (PMGL) |
Australian Journal of Basic and Applied Science, 8(4), pp ; 332-339 |
M. Malik, R. Ghoni, S. Sharif, W.A. Wan Yusoff |
2014 |
92. |
3 Dimensional porosity in electroless Ni-YSZ composite coating |
Advanced Materials Research, Vols 1025-1026 pp 672-676. |
N.B. Baba, M.A. harunsyam Lamshah and M.A. Mohd Amin |
2014 |
93. |
optimisation of electroless NI-YSZ composite coating process on high ceramic YSZ particle and porosity content |
American-Eurasian Journal of Sustainable Agriculture, 2014 Special, Vol 8(11), pp 26-31 |
N.B. Baba, M.J. Jaafar, M.A. Jaafar, S.N./ Abd lahli |
2014 |
94. |
Performance of fabricated portable grinder on traditional lathe machine in manupulating multi-tasks machine |
Australian Journal of Basic and Applied Science, 8(4), pp ; 855-858 |
M.Malik, M.F. Mat Nor, C.M. Che Omar, N. Afzainizam |
2014 |
95. |
Defect characterization based on eddy current technique; technical review |
Advance in Mechanical Engineering |
Ruzlaini Ghoni, Mahmood Dollah, Aizat Sulaiman, Fadhil Ibrahim@Mamat |
2014 |
96. |
A Novel Three-phase Matrix Converter Based Induction Motor Drive Using Power Factor Control.” Australian Journal of Basic and Applied Sciences |
Australian Journal of Basic and Applied Sciences. Special 2014. 8(4): p. 409-417 |
Ruzlaini Ghoni, Ahmed N. Abdalla |
2014 |
97. |
Robust Dynamic Inverse controller for spacecraft Model |
International Journal of Scientific Research, 2014. 3(4): |
Kereamsubry Settar, Abdalla N Ahmed, Razali Daud, Al-Mashhadany I Yousif, Ruzlaini Ghoni |
2014 |
98. |
Investigation study on the surface finish of the hole quality using reaming process |
Australian Journal of Basic and Applied Science, 8(4), pp ; 799-803 |
C.O.C. Muhamad, M. Malik, S. Zainal ariffin, A.Ahmad Faiz |
2014 |
99. |
Conductive biodegradable film ofN-octyloxyphenyl-N-(4-methylbenzoyl)thiourea |
Bulletin of Materials science, 37(2): 357-369 |
Wan M. Khairul, M.I.N. Isa, A.S. Samsudin, Hasyiya Karimah Adli and Saidatul Radhiah |
2014 |
100. |
Synthesisand characterization of palladium (II) Complex of N-pentanoylthioreido)-N-propanoic acid and its application as catalyst in heck cross coupling reaction |
Australian Journal of Basic and Applied Science, 7(9): 149-155 |
Saidatul Radhiah, Wan M. Khairul and Mustafa Shamsuddin |
2014 |
101. |
Synthesis and characterization of nitrobenzoylthiourea derivatives as potential conductive biodegradable thin films. |
Phosphorus, Sulfur and Silicon, 189: 640-651 |
Wan M. Khairul, Khalisah asilah Mokthar, M.I.N. Isa, A.S. Samsudin, Hasyiya Karimah Adli and Saidatul Radhiah |
2014 |
102. |
Contribution properties and behaviour of CMC-alkoxy thiourea polymer electrolyte |
Molecular Crystal and Liquid Crystal, 604:126-141 |
Saidatul Radhiah Ghazali,K. Kubulat, Wan M. Khairul, M.I.N. Isa, A.S. Samsudin |
2014 |
103. |
Autonomous Mobile robot path planning using evaluation values of geographical elements |
Australian Journal of Basic and Applied Aciences |
Wanm Zulkarnain Othman |
2014 |
104. |
Pattern behaviour of electromyography signal during arm movements |
Australian Journal of Basic and Applied Aciences |
Wanm Zulkarnain Othman |
2014 |
105. |
Compatibility study of replacement material for cold cutting machine |
Australian Journal of Basic and Applied Aciences |
Wanm Zulkarnain Othman |
2014 |
106. |
Intelligent caddy robot using autonomous tracking system |
Australian Journal of Basic and Applied Aciences |
Wanm Zulkarnain Othman |
2014 |
107. |
3D design and modelling of manual onion crusher |
Australian Journal of Basic and Applied Science, 8(4), pp ; 726-731 |
Z.Muda, M.H. Ibrahim, W.N.S.Wan Ariffin |
2014 |
108. |
A study of security Awearness in using Wireless Network |
Australian Journal of Basics and Applied Science (AJABAS) |
Aini Zuriyati, Muriati Muda, Akhyari Nasir |
2014 |
109. |
Broadband Wireless in Malaysia: A review |
Autralian Journal of Basics and Applied Science (AJABAS) |
Aini Zuriyati, Zainuddin, Muriati Muda |
2014 |
110. |
Protein Sequence Alignment using Dynamic Programming |
Australian Journal Basics and Applied Science (AJABAS) |
Ziti Fariha, Aini Zuriyati |
2014 |
111. |
Learning Motivation Assessment Model: A Review |
Australian Journal of Basic and Applied Science |
Azliza Yacob, Noraida Hj Ali, Mohd Hafiz Yusoff, Md Yazid Mohd Saman, Nur Sukinah, Noor Suhana |
2014 |
112. |
Artifical Intelligent Based Technique in Intrusion Detection System: A Review |
Australian Journal of Basic and Applied Sciences |
Noor Suhana Suaiman, Rohani Abu Bakar, Norrozila Sulaiman, Nur Sukinah Aziz, Azliza Yacob |
2014 |
113. |
Assessing of Attribute Website Usability |
Australian Journal of Basic and Applied Sciences |
Nur Sukinah Aziz, Adzhar Kamaludin, Azliza Yacob, Noor Suhana Sulaiman |
2014 |
114. |
The Usage of Computerised Accounting system: The Case of Small and Medium Enterprise in Malaysia |
Australian Journal of Basic and Applied Sciences |
Amelia, Ziti Fariha, Azliza |
2014 |
115. |
Refinement of the ISO 9126 Model For Evaluating Software Product Quality in e-Book |
Australian Journal of Basic and Applied Sciences |
Nurul Haslinda, Ziti Fariha, Syahrul Fahmy, Nur Sukinah, Azliza Yacob, Nurshuhada |
2014 |
116. |
Item Response Theory: Experimental Results |
Kolokium Siswazah Informatik dan Matematik |
Azliza Yacob, Noraida Hj. Ali, Mohd Hafiz Yusoff, Md Yazid Mohd Saman |
2014 |
117. |
Enhancement of the ARCS model for gamification of learning |
3rd International Conference on User Science and Engineering |
W. M. Amir Fazamin W. Hamzah, Noraida Hj Ali, Md. Yazid Mohd Saman, Mohd Hafiz Yusoff, Azliza Yacob |
2014 |
118. |
Penganalisis Tahap Keupayaan Berasaskan TQM (PAHATqm) |
National University Carnival on e-Learning |
Noraida Hj Ali, Azliza Yacob, Md Yazid Mohd Saman, Mohd Hafiz Yusoff |
2014 |
119. |
Preparation And Thermal Properties Of Phenolic Resin – Silica Nanocomposites Via Solvothermal Method |
Norul Azlin Mohd Zin, Nor Bahiyah Baba, Muhammad Asyraf Mohd Amin |
International Conference On Material, Manufacturing And Mechanical Engineering |
2015 |
120. |
Numerical Comparison On Conjugate Gradient Method For Solving Unconstrained Optimization |
Wan Farah Hanan Binti Wan Osman |
7th International Conference On Research Education In Mathematics (ICREM7) |
2015 |
121. |
Regression Analysis On Factors Influencing Students Satisfaction Towards Programme Course |
Nurulhaida Zakaria, Rozila Umar, Sharifah Sakinah, Wan Husna Aini |
International Academic Conference |
2015 |
122. |
Extended One-Step Block Method For Solving Stiff Initial Value Problems |
Nur Zahidah Mukhtar |
7th International Conference On Research And Education In Mathematics (ICREM7) |
2015 |
123. |
Redesigning Rain Gauges Network In Johor Using Geostatistics And Simulated Annealing |
Mohd Khairul Bazli Mohd Aziz, Fadhilah Yusof, Zalina Mohd Daud, Zulkifli Yusop, Mohammad Afif Kasno |
AIP Conference Proceedings |
2015 |
124. |
Optimal Design Of Rain Gauge Network In Johor By Using Geostatistics And Particle Swarm Optimization |
Mohd Khairul Bazli Mohd Aziz, Fadhilah Yusof, Zalina Mohd Daud, Zulkifli Yusop, Mohammad Afif Kasno |
Fifth International Conference On Geotechnique, Construction Materials Andenvironment, |
2015 |
125. |
Preparation And Thermal Properties Of Phenolic Resin – Silica Nanocomposites Via Solvothermal Method |
Norul Azlin Mohd Zin, Nor Bahiyah Baba, Muhammad Asyraf Mohd Amin |
Norul Azlin Mohd Zin, Nor Bahiyah Baba, Muhammad Asyraf Mohd Amin |
2015 |
126. |
Solubilization of grapheme flakes through covalent modification with well defined azido-terminated poly(ε-caprolactone) |
Journal Applied Polymer Science |
A. Nabihah, K. Hatano, D. Ando, M. Kubo, F. Kokai |
2015 |
127. |
Graphene modification in polylactic acid nanocomposites: a review |
Polymer Bulletin |
H.Norazlina, Y. Kamal |
2015 |
128. |
Supercritical carbon dioxide-assited process in synthesis of polymer/clay melt |
Macromolecular Research |
H.Norazlina, Y. Kamal |
2015 |
129. |
Optimization and characterization of calcium alginate/konjac glucomannan beads as oral protein drug delivery system |
International Journal of Current Pharmaceutical & Clinical Research |
Hajaratul Najwa, M. Shuhaimi, M., Yazid, A.M. and Fitrianto, A. |
2015 |
130. |
Development of alginate – gum Arabic beads for targeted delivery of protein. |
SMU Medical Journal |
Hajaratul Najwa, M. Shuhaimi, M., Yazid, A.M. and Fitrianto, A |
2015 |
131. |
Removal of methylene blue, Rhodamine B and ammonium ion from aqueous solution by adsorption onto sintering porous materias prepared from coconut husk water |
Open Journal of Inorganic Non-Metallic Materials 4(3) |
Ahmed H.A. Dabwan, Nakane Yuki, M.A., Nur Amni, Hideyuki Katsumata, Tohru Suzuki, Satoshi Kaneco |
2015 |
132. |
Analysis of dust distribution in silo during axial filling using computational fluid dynamics: assessment on dust explosion likelihood. |
Process Safety and Environmental Protection |
S.I. Rani, J. Gimbun and B.A. Aziz. |
2015 |
133. |
Defect signal analysis for non-destructive testing assesment |
International Conference on fluids and chemical engineering (FluidsChe) |
Damhuji Rifai,
Mohd Aizat,
Ahmed N.
Abdallah,
Amada Afiq,
Mohamad Amarul,
Kharudin Ali |
2015 |
134. |
Instrumented to identify the parameters that are effective due to a vehicle accident in malaysia |
International Academic Conference |
Kharudin ali, ahmad saifizul Abdullah, mohammad rehan karim |
2015 |
135. |
Design and implementation of portable mobile phone charger using a multi directional wind turbine |
International Academic Conference |
Mohd tarmizi Ibrahim, damhuji rifai, Nik Muhammad Hasif, Noraznafulsima Khamsah, Ruzlaini Ghoni, Kharudin Ali |
2015 |
136. |
Study on Mechanical and Physical Behaviour of Hybrid GRFP |
Advances In Material Sciences And Engineering |
Nor Bahiyah Baba, Ahmad Syakirin Suhaimi, Muhamad Asyraf Mohd Amin, Alias Mohd |
2015 |
137. |
Optimization Machining Parameter on cutting Temperature using a various diameter of coolant Nozzle during CNC Lathe Process of Aluminium AlLoy A1319. |
International Academic Conference (IAC) 2015 |
Zainal Ariffin Selamat, Nurul Bin Adam, Nor Bahiyah Baba, Alias Mohd |
2015 |
138. |
Effect of surfactants on Electrodes Ni-YSZ Composites Coating |
Australian Journal of Basic And Applied Science |
Nor Bahiyah Baba, Rabiatul Adawiyah Ramli, Muhamad Asyraf Bin Mohd Amin |
2015 |
139. |
Study on the effect of EN Process Parameters on Ni-YSZ Co-deposition Coating Thickness |
Australian Journal of Basic And Applied Science |
Nor Bahiyah Baba, Cw. Mastura C.w Md Zin, Nurul Hazwani Ghazemi, Siti Nor Azuani Abd Latif. |
2015 |
140. |
Physical Studies On Electroless Ni-YSZ Composites Coating |
ARPN Journal of Engineering And Applied Sciences |
Nor Bahiyah Baba, S.N. Abd Lahli |
2015 |
141. |
Physical Studies On Electroless Ni-YSZ Composites Coating |
ARPN Journal of Engineering And Applied Sciences |
Nor Bahiyah Baba, S.N. Abd Lahli |
2015 |
142. |
Design Enhancement and Moldflow Analysis of Injection Mould for Stirrer |
International Academic Conference (IAC) 2015 |
Mohd Hairy Basir, Raja Manisah Raja Mamat, W.N. I. Wan Mohd |
2015 |
143. |
Effect of CNC Lathe Machining Performance by Varying Coolant Nozzle Diameter |
International Academic Conference (IAC) 2015 |
Zainal Ariffin Selamat, Ahmad Razlan, Yusuf/M.M. Rahman |
2015 |
144. |
Underwater image quality enhancement through integrated color model with Rayleigh distribution |
Applied soft Computing journal |
Abdul ghani, A. S. Mat Isa, N.A |
2015 |
145. |
Interactive Application Software for Pre-school using JAVA |
TATIUC Research and Innovation Exabition (TARIE) |
Nurshawani, Aini Zuriyati |
2015 |
146. |
Math Easy |
TATIUC Research and Innovation Exabition (TARIE) |
Nur Ashida, Aini Zuriyati |
2015 |
147. |
Smart interactive Jawi |
International Conference Exposition on Invention of Institution of Higher Learning (PENCIPTA) |
Aini Zuriyati, Noraniah, Nur Idayu, Muriati |
2015 |
148. |
Learning Management System at Higher Education |
Preceeding of International Academic Conference (IAC) |
Aini, Nur Sukinah |
2015 |
149. |
Integration of TQM in Blended Learning |
5th International Conference on e-Learning |
Noraida Hj Ali, Azliza Yacob, Md Yazid Mohd Saman, Mohd Hafiz Yusoff, W. M. Amir Fazamin W. Hamzah |
2015 |
150. |
Learning Motivation for Computer Programming Course |
Kolokium Siswazah Informatik dan Matematik |
Azliza Yacob, Noraida Hj Ali, Md Yazid Mohd Saman, Mohd Hafiz Yusoff |
2015 |
151. |
Evaluation of e-Book Applications Using ISO 25010 |
2nd International Symposium On Technology Management & Emerging Technology |
Nurul Haslinda, Fahmy, Sukinah, Roslina, Ziti Fariha, Azliza Yacob, Suhana, Norsuhada |
2015 |
152. |
An Analyzer For Item Dificulty (AAfID) |
Inovasi UMT |
Noraida Hj Ali, Azliza Yacob, Md Yazid Mohd Saman, Mohd Hafiz Yusoff |
2015 |
153. |
Comparison of properties of hybrid GFRP and hybrid GFRP-Kenaf |
Nor bahiyah baba |
3rd International conference of Engineering |
2016 |
154. |
Properties of Mixed Species Lamination Product from Khaya ivorensis and Oil Palm Trunk |
M.A. Mohd Asyraf, Z. Nurul Ashikin, M.F. Anis Farhanah, A. Nur Adlina, N. Kamarulzaman |
3rd International conference of Engineering |
2016 |
155. |
Investigation on Dust Cloud Generation during Free Fall: Technical Review on Research Approach |
M. F. Anis Farhanah, B. Nor Bahiyah, R. Siti Ilyani |
3rd International conference of Engineering |
2016 |
156. |
Evaluation of Inhibitive Effect of Corn Flour on the Marine Corrosion of Mild Steel. |
R. Rosliza and N. Siti Saudah |
3rd International conference of Engineering |
2016 |
157. |
The Effect of PEG Loading on Properties of PLA/CNT Blends |
H. Norazlina, A.Shahira, A.Mohammad Azan, Y.Kamal |
3rd International conference of Engineering |
2016 |
158. |
Functionalization of Graphene: Solubility Improvement |
A.Nabihah, Aminul Hakim, Azra Syahirah, Masataka Kubo |
3rd International conference of Engineering |
2016 |
159. |
Mass Transport Analysis of Direct Ethanol Alkaline Fuel Cell |
K. Siti Kartom, A. Suhaila, A.S. Abdul Halim, M. Nor Azhariah |
3rd International conference of Engineering |
2016 |
160. |
Preparation of Graphene Oxide Nanoribbons (GONR) from Carbon Nanotubes (CNTs) |
M. Rabiatul Manisah, N.D. Nur Izatty Ilyani, Y. Kamal |
3rd International conference of Engineering |
2016 |
161. |
Multichannel Data Aquisition System for Monitoring Supercapasitor Module and Cells |
Nirwan Syarif, Assaidah, Yuanita Windusari |
3rd International conference of Engineering |
2016 |
162. |
Smart Panel Monitoring Current |
Anuar M.A.M, Ammar H.H , Nadia A.M.H , Fahmi M.I.R |
3rd nternational conference of Engineering |
2016 |
163. |
Solar Charged for Car Battery Power Backup System |
Ruzlaini Ghoni, Mohd Zakhwan Ton Mamat, Mohd Tarmizi Ibrahim |
3rd International conference of Engineering |
2016 |
164. |
Simulation study of sensor electrode size using conducting bubble column for electrical resistance tomography |
Suzanna Ridzuan |
3rd International conference of Engineering |
2016 |
165. |
TRANSFORMATION OF UNIVERSITY COLLEGES TO FULL-PLEDGED UNIVERSITIES: A PROPOSED CONCEPTUAL FRAMEWORK FOR MALAYSIAN HIGHER LEARNING INSTITUTIONS |
Sara Shariffuddin and Jamal Rizal Razali |
3rd International conference of Engineering |
2016 |
166. |
WHATSAPP AS AN INSTRUCTIONAL TOOL BEYOND A CLASSROOM IN A MALAYSIAN COLLEGE |
Sara Asmawati Shariffuddin, Wan Raihan Wan Shaaidi and Shahirah Mohd Hashim |
3rd International conference of Engineering |
2016 |
167. |
A Study of Internet Protocol Digital Microwave Radio (IP DMR) Propagation Delay Affected Downtime in Oil and Gas Company |
Aida Samsudin, Azham Ahmad |
3rd International conference of Engineering |
2016 |
168. |
Exploring Studies of Information Security Culture in Malaysia |
Akhyari Nasir, Ruzaini Abdullah Arshah, Mohd Tamizan Abu Bakar |
3rd International conference of Engineering |
2016 |
169. |
Effect of CNC Lathe Machining Performance by Varying Coolant Nozzle Diameter |
Selamat, Z.A., Baba, N.B., Alias.M., Yusof, A.R., Rahman, M.M.. |
Indian Journal of Science & Technology |
2016 |
170. |
Effect of cooland nozzle sizes on turning Aluminium Alloy AL319 |
Selamat, Z.A., Baba, N.B., Alias, M., Yusoff, A.R., Rahman, M.M. |
Indian Journal of Science & Technology |
2016 |
171. |
Study on fabricated toolpost shaft efficiency for cold cutting machine. |
Baba, N.B., Nugroho, W., Muhamad , H.A. |
Indian Journal of Science & Technology |
2016 |
172. |
Optimization of porosity response in electroless Ni-YSZ co-deposition. |
Baba, N.B., Mastura, C.W., Md Zin, C.w., Ghazemi, N.H., AbdLahli, S.N.A |
Indian Journal of Science & Technology |
2016 |
173. |
Investigation on hardness or heat treated ASSAB tool steels |
Mohd, A. , Hazwani, N., Baba, N.B. |
Indian Journal of Science & Technology |
2016 |
174. |
Effect of Injection Molding parameters on recycled ABS (r-ABS) mechanical properties. |
Mohd, A. Roslan, A.A., Baba, N.B. |
Indian Journal of Science & Technology |
2016 |
175. |
Design and implementation of portable mobile phone charger using a multi directional wind turbine |
Kharudin Ali, Wan Syahidah Wan Mohd, Damhuji Rifai, Muaz Ishtiyaq Ahmed, Asyraf Muzakkir, Tq Ammar Asyraf |
Indian Journal of Science & Technology |
2016 |
176. |
Subsurface defects evaluation using eddy current testing |
Damhuji Rifaie, Ahmed N. Abdalla, Noraznafulsima Khamsah, Mohd Aizat, Muhd Fazli. |
Indian Journal of Science & Technology |
2016 |
177. |
Development of electric source machine for public usedIbrahim, M.T., Rifai, D., Hasif, N.M., (...), Ghoni, R.,Ali, K. |
Ibrahim, M.T., Rifai, D., Hasif, N.M., (...), Ghoni, R.,Ali, K. |
Indian Journal of Science & Technology |
2016 |
178. |
Enhancement of Variable Speed Brushless DC Motor Using Neural Network. |
• R. S. N. A. Raja Aris, A. S. Abdul Ghani, M. L. Muhd Zain |
Indian Journal of Science and Technology (INDJST). |
2016 |
179. |
Giant magnetoresistance sensors: A review on structures and non-destructive eddy current testing applications |
Rifai, D.., Abdalla, A.N., Ali, K., Razali, R. |
Sensors switzerland |
2016 |
180. |
Defect signal analysis for non-destructive testing assessment |
Rifai D. , Abdalla, A.N., Noraznafulsima, Kharudin, Ruzlaini. |
ARPN Journal Of Engineering and Applied Sciences |
2016 |
181. |
Bivalves as Bio-indicators for heavy metals detection in Kuala Kemaman, Terengganu. |
Dabwan, A.H.A., Taufiq .M. |
Indian Journal of Science and Technology (INDJST). |
2016 |
182. |
Synthesis of zeolite Na-A from local kaolin for bio-ethanol purification |
Afzainizam, N. , Embong, A.M., Yaacob, R.A.I.R., (...) Ashgaftaki, A.A., Elsayed, M.M. |
Indian Journal of Science and Technology (INDJST). |
2016 |
183. |
Optimal design of rain gauge network in Johor by using geostatistics and particle swarm optimization |
Aziz, M.K.B.M., Yusof, F., Daud, Z.M. , Yusop, Z., Kasno, M.A. |
International Journal of Geomate |
2016 |
184. |
Learning Management System at Higher Education |
Indian Journal of Science and Technology |
Aini Zuriyati, Sukinah |
2016 |
185. |
An Analysis for the item Dificulty in Computer Programming Learnings' Module |
5th International onference on Computer Science, Information, System & Communication Technologies |
Noraida Hj Ali, Azliza Yacob, Md Yazid Mohd Saman, Mohd Hafiz Yusoff |
2016 |
